Putting styles on windows at home requires a few different steps. First, you need to align the window horizontally and vertically. Next, you need to overlap all house wrap seams, preferably at least six inches. You also want to make sure that you have a good height versus width ratio.
Aligning Windows Horizontally and Vertically.
Getting your windows aligned to each other is no small feat. The best way to do it is by using the proper materials and a few trade tricks. As a bonus, the whole process is a breeze. The results can be kin to having an architect build your walls. If you want the best of the best when it comes to energy efficiency and customer convenience, you need to choose great architects, windows makers, and JDI Windows who are experts at this. As a bonus, you get to see the view from time to time. The resulting experience is something you’ll want to brag about to your friends and family. This is all in the context of a happy homeowner. The one problem is you have to make the rest of your life, not to mention the mess above. A well-informed home insurance agent is likely to have you covered on the spot.
Hanging Curtain Brackets on the Wall Above and Outside the Window Molding
Whether you are installing a new curtain pole or want to upgrade the existing one, it is important to get the correct measurements. In addition to your window size, the width of the window frame is also essential. It should be at least 25-30% of the window’s width. You can calculate the width of the frame using a picture or a measuring tape.
The bottom of the curtain should be about half an inch off the floor. The top of the curtains should be at least four inches above the window. You may also need to buy additional panels for more expansive windows.
If you are hanging your curtain pole on a wall, it is best to install the brackets at the outside edge of the molding. This will help accentuate the window and make the room look more spacious.
Creating the Illusion of a Taller Window
is an effective way to make your home feel larger than it actually is. There are many ways to achieve this, but the easiest and most foolproof way is to replace your existing window treatments with curtains and blinds. Draping curtains over your windows will give you the illusion of a bigger space while still letting in plenty of light.
The trick to achieving this is to use curtains and blinds that are light in color. You can also opt for a curtain rod higher than your window frame to improve the flow of natural light throughout your home. The best type of rod to choose is a wooden one.
While you are at it, you might as well go for a curtain rod with a wider gap. This will make your windows look larger by hiding the wall from the window line. For a more formal look, hang swags along your curtains.
Overlapping All House Wrap Seams at Least 6 Inches
While installing a house wrap, it is essential to overlap all seams at least 6 inches. This is necessary to ensure the best water resistance.
When installing a house wrap, it is also essential to be careful around the door, window, and foundation penetrations. If the edges are not sealed properly, air will leak through the wall, creating a problem. This can also be solved with a sealant. The manufacturer’s instructions for house wrap installation should be followed to get the best results.
The first step in the installation process is to install the kick-out flashing. This is very important to help with the drainage of rainwater. You should also install the exterior window and door flashing. This is required to keep the water from leaking into the framing.